Faccin HAV 4072 Hydraulic 3 Roll Plate Roll – Industrial Powerhouse
Faccin HAV 4072 Hydraulic 3 Roll Plate Roll Specifications:
Capacity: 4000mm X 72mm
Dimensions:
- Length: 339″
- Width: 138″
- Height: 146″
- Weight: 222,000 lbs
Roll Size:
- Center Roll Diameter: 28″
- Lateral Rolls Diameter: 26″
Power Supply:
- Three-Phase Voltage: 460V, 60Hz
- Total Installed Power: 110 kW
Bending Capacities:
Full-Length Bending Capacities (Based on Yield Point of 36,000 psi):
- Rolling Only: 2.953″ up to 142″ ID
- With Pre-Bend: 1.969″ up to 142″ ID
- Rolling Only: 2.559″ up to 40″ ID
- With Pre-Bend: 1.772″ up to 40″ ID
Full-Length Bending Capacities (Based on Yield Point of 52,000 psi):
- Rolling Only: 2.540″ up to 142″ ID
- Pre-Bend: 1.693″ up to 142″ ID
- Rolling Only: 2.201″ up to 40″ ID
- With Pre-Bending: 1.524″ up to 40″ ID
Half-Length Bending Capacity (Based on Yield Point of 52,000 PSI):
- Rolling Only: 3.175″ up to 142″ ID
- Pre-Bending: 2.116″ up to 142″ ID
Performance Limits:
- Material Type
- Desired Diameter
- Plate Width Compared to Rolls’ Working Width
Unleash the full potential of your industrial projects with the precision and power of the Faccin HAV 4020 Hydraulic 3 Roll Plate Roll. Experience unparalleled efficiency and reliability in every roll.
Disclaimer: All specifications provided are approximate and intended for informational purposes only. It is the responsibility of the buyer to verify the accuracy of the specifications before making a purchase. The seller does not accept any liability for errors or omissions in the provided information.
Additional Formula for bending Stainless Steel compared to Mild Steel
To determine the maximum thickness of stainless steel that the Faccin HAV 4072 Hydraulic 3 Roll Plate Roll can roll at 10 feet, we must consider the machine’s capacity and adjust for the higher yield strength of stainless steel compared to mild steel.
Machine Capacity
From standard specifications:
- Maximum Rolling Capacity (Mild Steel, 36,000 PSI Yield Strength): ~2.953 inches (75 mm) at full length.
- Maximum Pre-Bending Capacity (Mild Steel, 36,000 PSI Yield Strength): ~1.969 inches (50 mm) at full length.
Adjustment for Stainless Steel
Stainless steel has a higher yield strength than mild steel, typically around 1.5 to 2 times the yield strength of mild steel, depending on the grade. To account for this, the rolling capacity for stainless steel is usually reduced by 50% of the mild steel rating.
Estimated Capacity for Stainless Steel at 10 Feet
Using the reduction factor:
- Max Rolling Thickness for Stainless Steel: ~1.5 inches (37.5 mm) at 10 feet.
- Max Pre-Bending Thickness for Stainless Steel: ~1 inch (25 mm) at 10 feet.
Faccin HAV 4072 Hydraulic 3 Roll Plate Roll, 4000mm x 72mm capacity, heavy-duty plate rolling machine, industrial plate roller, 28-inch center roll diameter, 26-inch lateral roll diameter, precision pre-bending and rolling, 36,000 psi yield strength, plate bending solutions, three-phase 460V power, 60Hz, 110 kW installed power, 222,000 lbs machine weight, large-scale plate rolling, ID bending 142-inch, 40-inch diameter rolling, advanced hydraulic 3-roll plate bender, metal fabrication equipment, industrial rolling machines, Faccin plate roll specifications
